|
|
A wide range of products manufactured by Analytic
Systems are useful in the Telecom Sector. They include
Battery Chargers (from AC or DC sources), DC/DC Voltage
Converters (fully isolated for use on positive or
negative ground systems, and DC/AC Inverters. The
company also manufactures a 10-channel Optoisolator
card for converting signals from one ground to another
or to different voltage levels or polarities.
|
|
 |
Battery
Chargers are available for 12, 24 or 48 VDC battery systems.
Power levels are 300, 600 or 1000 watts. Source voltages include
110 or 220 VAC, 12, 24, 48, 110 or 250 VDC. Charging profiles
are selectable between 2 stage and 3 stage, and include a manually
initiated equalize. Temperature compensation is standard. The
300 watt models (BCA310 or
BCD310) are wall mountable.
The 600 and 1000 watt models (BCA610,
BCA1000, BCD610
or BCD1000) are available
as wall mount or rackmount units.
The type of mounting must be specified at the time of ordering.
Digital metering of charging volts and charging amps is standard
on the rack mount models, and optional on all wall mount models. |
|
|
 |
A
wide range of DC-DC voltage converters are available. Common
negative step down models range from 60 to 600 watts. Common
negative step-up models range from 120 to 600 watts. Fully isolated
models are available in 5 amp, 7 amp (VTC120i
or VTC120ih series) as well as 600 and 1000 watts (VTC610,
615, 1000
or 1015 series). The VTC610R,
615R, 1000R
and 1015R series are also
available in rackmount and come
standard with digital volt and amp displays. |
|
|
|
Power
supplies from 110 or 220 VAC are available in 120,
240, 300,
600 and 1000
watts. The 300 watt models are available in wall mount only.
Digital Voltage and Current displays are optional for the 300,
600 and 1000 watt models. The 120, 600 and 1000 watt models
are available in wall or rackmount
and include the digital displays as standard. |
| Optoelectric
Isolation Card |
|
 |
This
card was specifically developed for Telus. It provides input/output
isolation and accepts a wide variety of Input DC Logic signals
and converts them to phone_no System standard Output DC Logic
signals. The card mounts directly into a Wescom 400 series
card rack. The Telus Item ID for this card is 1066993.
For
further information please contact
us.
|
|
