BCA1510-MS C.O.T.S. Battery Charger

Benefits

Ultra-Quiet
Power sensitive electronics without interference
Rugged & Reliable
Ensure years of safe and trouble free operation
Fast & Accurate Charging
Download Data Sheet

The BCA1510 battery charger provides up to 700 watts to charge a 12, 24, or 28 Volt Military Electrical System from a 110 / 220VAC (Autoswitching) source.

This all-new single board design incorporates state-of-the-art switchmode technology for unmatched efficiency and ultra-quiet operation. Multiple stages of filtering reduce radiated or conducted noise to very low levels to meet MIL461E. Extra features include visual indicators for output ON and charging (single dual brightness LED).

Safety features include over-temperature shutdown, current limiting, short-circuit protection with automatic recovery, input undervoltage shutdown and output overvoltage crowbar.

Optional features include a 3-Bank Load Splitter. We are confident that you will get many years of reliable service from this AC Battery Charger.

Features

Ideal as a COTS Power Supply for Military Applications
Military-Grade extrusion ensures a high tolerance for shock and vibration
Ultra-quiet, low EMI operation
Can be left permanently connected
Can function as a power supply
Optional Carrying Handle available
Visual indicators for output and charging
Short circuit protection
Output over-voltage crowbar
Inrush Current Limiting with solid state bypass
110/220 Vac auto-ranging input
3 year parts and labour warranty
Designed to meet MIL-STD 810F, Method 514-3, Cat-I Proc I for vibration
Built to the Q-Base Quality System Standard

Military Option

Most of the products manufactured by Analytic Systems can be adapted for military use (Commercial Off The Shelf).

We provide four different levels of ruggedization; most often, a product in military use will use the extra-wide temperature range components to allow operation to -55 degrees Celsius.

The printed circuit boards are also protected against condensation and are enhanced with vibration protection that meets or exceeds MIL-STD810F, Method 514-3 and Cat-1 Proc 1.

C.O.T.S. products are designed to meet EMC radiated and conducted emissions MIL-STD 461E.

All C.O.T.S. products are manufactured in accordance with IPC-A-610.

Electrical [Input]
Nominal Vac (ip)	110 / 220 (Autoranging)
Actual (Vac)	90-140	180-284
Input Amps (Max)	16.2	8.1
Input Circuit Breaker	25A Magnetic
Input Frequency	45-405 Hz
Noise on Input	< 50 mV

Electrical [Output]
Output Nominal (op)	12	24
Output Volts (DC)	13.6	27.2 (24.0 and 28.0 Avail)
Charging Amps	52	26
Battery Banks	Dual Output Available
Output Crowbar	16.0 ± 0.5V	32.0 ± 1.0V
Battery Size (Amp Hrs.)	400-600	200-300
Output Ripple & Noise	< 50mV
Regulation (Line & Load)	< +/- 0.5%
Duty Cycle	Continuous 100% for 24 hours per day
EMC	Designed to meet MIL461E
Efficiency	> 75% @ Maximum Output
Stages	2 Stage Constant Current to Constant Voltage

Environmental Specification
Operating Temp. Range	-40° to +55°C @ maximum output Derate Linearly 2.5% per°C from 50°C to 85°C (Optional pre-heater to allow -55°C operation available)
Humidity	0 - 95°C Relative Humidity (non-condensing) with optional conformal coating
Audible Noise	NONE Ødb @ 3 ft
Typical Service Life	>10 years (87,600 hours)
Isolation	Case & Input-Output 1500VDC / Output-Case 500VDC

Mechanical Specification
Length	17.0 in/ 43.2 cm
Width	8.2 in/ 20.8 cm
Height	3.5 in/ 8.9 cm (Without carrying handle)
Clearance	1 inch (2.5 cm) all around
Material	Marine Grade Aluminium– rainproof
Finish	Clear Chromate
Fastenings	All 18-8 Stainless Steel
Weight	14.4 lb / 6.6 kg
Connections	Cannon Connectors Shown (Other custom MIL-Spec Connectors also available)
Vibration	Designed to meet MIL-STD810F, Method 514-3 and Cat-1 Proc 1
Interconnect	IPC-A-610
Warranty	3 years

Product Guide

Impact Movie