Step up a 12 VDC battery to between 13.5 and 17.0 or 24.0 and 27.5 VDC in 0.5 VDC increments (via 3 position DIP switch), or stabilize a 12 or 24 VDC power system.

Safety features include reverse input protection, low input voltage alarm, low output voltage alarm, over temperature shutdown and alarm, a dry contact alarm relay output and output overvoltage crowbar. If the input voltage exceeds the regulated output voltage, the unit simply passes the voltage through with full LC filtering and a single schottky diode drop (0.5 VDC or less). Optional features include remote panel monitoring with On/Off control.

Applications include temporarily brightening 12 volt headlights or work lights, increasing voltage into an automotive or marine ignition system for hotter spark and/or prevention of failures due to voltage drop during engine start, stabilizing 12V and 24 VDC power systems in marine, automotive or aeronautical environments and more.

Features

• Vibration proof output voltage adjustment by 3 position DIP switch
• Audible & visual indicators for constant current, low input voltage, low output voltage & over-temperature
• Extremely rugged and well suited for marine and other demanding environments
• High tolerance for shock and vibration
• Ultra-quiet low EMI operation
• Current limiting protection
• Reverse input protection
• Output over-voltage crowbar
• Dry contact output fail relay
• Remote control option
• Wide-Temperature operation Available
• Parallel output diodes available
• Conformal Coating and/or Harsh Environment Ruggedization Available
• 3 year parts and labour warranty

Applications

• Marine & other rugged environments
• Mobile Offices (TV and Radio Vans)
• Automotive / RV
• Electric Utilities and Substations
• Base Station Power(Radio & Telecommunications)
• Industrial Controls(OEM Applications)
• Field Work / Construction Sites
• Solar/Alternative Power Systems
• Any 12 or 24V Equipment

Electrical [Input]

Input Volts(DC)	10.5-18	10.5-28
Input Amps (Max)	50
Input Fuse (AGC)	25x 2 Amp
Noise on Input	< 50 mV
Low Input Voltage Alarm	10.5 VDC
Current Limit	50 Amps in

Electrical [Output]

Output Nominal (op)	12	24
Output Volts (DC)	Input - 1V or 13.5 to 17.0  Whichever is greater	Input - 1V or 24.0 to 27.5  Whichever is greater
Output Adjustment	* 45
Output Crowbar	Programmed Output Volts x (1.3 ± 1%)
Output Ripple & Noise	< 50 mV
Low Output Voltage Alarm	Programmed Output Voltage minus 2.5 VDC
Transient Response	< 1V for 50% Surge
Regulation (Line & Load)	< +/- 0.5%
Duty Cycle	Continuous 100% for 24 hours per day
Efficiency	> 90% @ Maximum Output

* The actual output current capability depends upon the input/output voltage ratio.
   To obtain the actual output current capability at any given input voltage,
   use the following formula:
Output Amps = Input Volts/Output Volts x 45
For example, at 10.5 VDC in and 13.6 VDC out, the output current = 10.5/13.6 x 45 = 34.7 amps

Environmental Specification

Operating Temp. Range	-25° to +40°C @ maximum output Derate Linearly 2.5% per°C from 40°C (Optional -40°C extra wide temp. operation avail.)
Humidity	0 - 95°C Relative Humidity (non-condensing) with optional conformal coating
Audible Noise	NONE Ødb @ 3 ft
Typical Service Life	>10 years (87,600 hours)
Isolation	Any Input or Output to Case 500 VDC Input to Output – Common Negative

Mechanical Specification

Length	9.1 in/ 23.1 cm
Width	7.8 in/ 19.8 cm
Height	4.3 in/ 10.8 cm
Material	Marine Grade Aluminium
Finish	Black Anodize / Powder Epoxy Coat
Fastenings	All 18-8 Stainless Steel
Weight	6.0 lb / 2.7 kg
Connections	Four contact output terminals
Warranty	3 years