|
|
Most of the power supplies manufactured by Analytic Systems can be adapted for military use (COTS - Commercial Off The Shelf).
Commonly, military power supplies will use extra-wide temperature range components to allow operation to -40 degrees Celsius and the printed circuit boards will be dipped in silicone conformal coating for protection against condensation and enhanced vibration protection. Additional RTV Silicone will be used on specific components for additional vibration protection. This level of vibration protection meets or exceeds MIL-PRF-44485.
If you have a specific application and need help determining which Analytic military power supply is right for you, please CONTACT US, or Phone us (Toll-Free) at
1-800-668-3884.
|
|
|
The following are specific products designed and manufactured to supply power for Military applications:
|
Military Power Supplies - MIL STD |
PWS650-MS |
The PWS650-MS-26 Power Supply provides up to 650 watts to power a 26V military electrical system from a 110 and/or 220VAC source (autoranging). This design features a unique rainproof chassis that easily meets the MIL-STD 810D vibration standard.
<Spec Sheet> <Request More Info> |
PWS1510-MS |
The PWS1510-MS Power Supply provides up to 700 watts to power a 12, 24, or 28 Volt Military Electrical System from a 110 / 220VAC (Autoswitching) source. These units were developed for Syracuse Research’s ‘Man-Portable Radar Project’ designed for use by the US Army. This unit is also encased in a water-tight chassis.
<Spec Sheet> <Request More Info>
|
|
The PWS310-110-24-TEL Series of COTS power supplies were designed for the Telephonics’ Corporation to provide 12, 24, 28 or 48 Volts DC at up to 300 Watts of continuous power from a 110 or 220 Volt AC source.
<Spec Sheet> <Request More Info> |
DC DC Power Supply - MIL STD |
LIDC600-MS |
The LIDC600 COTS DC DC Voltage Converter is designed for recharging the SAFT Lithium Ion Battery (LBB) used by the US Armed forces from a 24V DC source such as a HumVee, and is controlled using industry standard interface circuitry. It can also be used in Bypass Mode as a Stand-Alone DC-DC voltage converter. It is designed to deliver 32.0 VDC at up to 22 amps continuous to recharge the battery. The output changes to 28 VDC at up to 22 amps continuous when operating in Bypass Mode.
<Spec Sheet> <Request More Info>
|
VTC600-MS
|
The VTC600-MS DC DC Converter provides up to 600 watts to power 12 or 24 Volt Military Electronics from a 20 – 45 VDC Source.
This all new single board design incorporates state of the art switchmode technology for unmatched efficiency and ultra-quiet operation.
NATO STOCK NUMBER #NSN-6130-20-000-8980
<Spec Sheet> <Request More Info> |
| If you have a specific application and need help determining which Analytic military power supply is right for you, please CONTACT US, or Phone us (Toll-Free) at 1-800-668-3884. |
|
