IPS300MW Series
  • IPS300MW Sealed Inverter Front view
BENEFITS
  • Connector for remote control and diagnostic LEDs
  • State-of-the-art MosFet technology for reliable operation
  • Fully sealed to IP66
  • Quiet operation
  • Rugged and reliable to ensure years of trouble free opereration
  • Simple controls
Electrical [Input]
Nominal (ip) 12 24 32
Actual (Vdc) 10.5-16 20-30 30-40
Input Amps (Max) 48 24 17
Input cIRCUIT bREAKER 50A 25A 20A
Electrical [Output]
Output Nominal (op) 110 220
Output Volts (AC) 115 ± 5 rms 225 ± 5 rms
Output Amps (Continuous/Peak) 2.5 / 3.3 1.4 / 1.8
Output Frequency (Crystal Controlled) 60 ± 0.01 Hz 50 ± 0.01Hz
Output Type Pure Sine Wave
Output Distortion < 5% at 300 Watts into 0.8 power factor load
Regulation (Line & Load) < +/- 0.5%
Duty Cycle Peak 20% for 10 min max. Continuous 100% for 24 hours per day
Efficiency >80% @ Maximum Output
Ground Fault Current Max 6 mA between Neutral and Ground
Environmental Specification
Operating Temp. Range -25C° to +40°C @ maximum output
Derate Linearly 2.5% per°C from 40°C to 85°C
(Optional -40°C to +55°C extra wide temp. operation avail.)
Humidity 0 - 95% Relative Humidity (non-condensing) 
EMC Designed to meet MIL461
Shock and Vibration Designed to meet MIL810
Audible Noise Ø dB @ 3 ft (34.5 dB when fan operating)
Typical Service Life >10 years (87,600 hours)
Isolation Output-Case & Input-Output 1500VDC
Input-Case 500VDC
Mechanical Specification
Length 11.5 in/ 29.2 cm
Width 8.7in/ 22.1 cm
Height 4.75 in/ 12.1 cm
Clearance 1 inch (2.5 cm) all around
Material Marine Grade Aluminium
Finish Black Anodize / Powder Epoxy Coat
Fastenings All 18-8 Stainless Steel
Weight 13.0 lb / 5.9 kg
Connections

Input - 2 x AWG8 x 1 meter

Output - Amphenol 7-8648 c/w Cover (not shown)

Safety Designed to meet CSA 22.2.107.1 & UL458 
Warranty 2 years