|
|
Many
of the products produced by Analytic Systems
are used in Utility or Industrial environments.
A common Utility voltage is 110 volts DC. However
power is required at 24 VDC for SCADA or PLC
applications. We produce a series of fully isolated
DC-DC voltage converters that convert 110 VDC
(90 - 140 VDC actual) to a fully regulated 27.2
VDC at 300, 600 and 1000 watts. When provided
with the optional paralleling diodes, multiple
units can be run in parallel for additional
power or redundancy.
If the application calls for batteries at the
24 VDC level, we also manufacture DC-DC battery
chargers at 300, 600 and 1000 watts.
|
| DC/DC
Converters and Chargers |
|
|
Our
DC-DC voltage converters are also widely used in industrial
applications ranging from steel mills to factory and distribution
warehouses. Again voltage converters that convert 110
or 250 VDC to 24 VDC or other required voltages from 12
to 48 volts DC for control or communications are common
applications.
Steel mills and other heavy industry applications are
difficult because the source voltage is very dirty, with
many spikes and ever voltage reversals on the input side.
Over years of practical experience, we have developed
converters that are capable of surviving and providing
years of reliable service even in such rough environments. |
|
|
Power Supplies for Forklift Applications |
|
 |
We
are often called upon to supply fully isolated DC-DC converters
to produce 15 - 16 volts DC at 5 to 7 amps from forklift
36 or 48 volts DC to run notebook computers. These are
a particularly tough application as the thyristor based
motor drives for the forks and tires produce large amounts
of overlying AC on the batteries and will cause many converters
to fail unless proper input circuitry is used. We call
this the 'forklift' modification.
If your application is for any system where such motor
drives are used on the source voltage side let us know
so we can make the proper modifications. |
|
|
|
Often
AC power is needed for running computers or other specialty
equipment in industrial applications. The IPS and IVS
series of pure sine-wave inverters are available from
100 to 10,000 watts to meet these needs. Input voltages
include; 12V, 24V, 48V, 72V, 125V, or 250 volts DC. The
same design and construction principles that have made
Analytic Systems a respected name in commercial marine
power also apply to Utility and Industrial applications.
Our all aluminium, anodized or powder coated construction
using only 18-8 stainless fasteners make our products
rugged and durable.
Contact us with your specific
requirements for a quote or proposal. |
|
|
